Preliminary Task: Editing

Introduction
When we came to edit our Preliminary Task, we used the Apple iMacs to do this. In our group we had limited knowledge of using the iMacs as we have normally been used to standard windows computers. However we learnt as we had more experience on the iMacs and soon adjusted to using the basic functions of the computer. We used a editing software called Final Cut Pro, this software was new to us, however we came to know the types of editing techniques that the software could do. In our group we each took turns editing the film and each one of us gave suggestions of what we could do.

Editing
When we started the process of editing, we first uploaded the shots from the camera to the iMac. Once we fully uploaded all shots, we ensured that they were all in the correct file, then we started a new project and began to edit. We dragged and dropped each shot individually, one at a time and cut the shot down to what we thought was right. When filming we left 3 second gaps at the start and end of each shot. This was so that we wouldn't miss any important parts in the shot. We cut almost all the shots we used in the project, because most had long pauses especially the shots with dialogue and the rest had small amounts of time that needed cutting to be in sync with the rest of the shots, this was for the match on action. For every few shots that were added and edited, we watched the sequence in which we could identify any point of weaknesses that could be edited to improve it. Also once the whole sequence was edited we added some transitions that helped match the sequence to make it loom in place.

Problems
When editing we had some problems that cost us time. One problem is that when using the iMacs we had to try to become familiar with the operating system and this was the same for the editing software, Final Cut Pro. Also when editing we noticed that the compulsory 180 degree rule shot was not correct. This meant we had to re-film this shot and upload and edit the shot again to complete the sequence.

When we come to film the real sequence, we will ensure that we don't encounter the same problems by making sure we are 100% familiar with the editing software on the iMacs this will help increase our productivity and reduce the amount of mistakes made when editing the film. Also when filming we will look back at the footage closely to make sure we have filmed it correctly, so we don't have to go and re-film when in the editing process.

Equipment
The equipment we used for editing was new to us as we haven't had much experience with the iMacs and software, so we had to learn the functions in order to complete the preliminary task.

- Apple iMacs
- Digital Camera
- Final Cut Pro Software

Evidence of Editing
Within the editing process of the Preliminary Task, we decided to take pictures with our mobile phones. These photos show the equipment we were using and our group editing the sequence.

Photo Evidence: